VT Pack™ 4:1 ratio 12.5 VA (two transformer)
A6004812-2

This fully ANSI compliant two transformer VT Pack™ with a ratio of 4:1 is designed to be used on 480V single phase and or 3-wire delta applications where a 120-volt secondary is required. The “A” designation specifies 12.5 VA rating. This VT Pack consists of two revenue-accurate voltage transformers that are encased in epoxy inside a UV-resistant polycarbonate enclosure.

This VT Pack can be used with either induction (disk type), solid-state fixed voltage, wide voltage range solid-state meter Forms 3S, 4S or 35S / 45S. The connector on the VT Pack mates with a wiring harness, or the wiring harness in one of our sockets. For conventional transformer-rated applications, a color-coded wiring harness is available with either our standard 6-foot harness or custom wire color-coding and lengths to meet your Company's requirements.

The VT Pack can be mounted in a pad mount transformer, transformer cabinet, on the outside of an existing meter socket, in one of our enclosures designed for that purpose ( refer to “Product” page, “Enclosure” tab, Long Narrow or Universal ), or other convenient location. Many meter socket manufacturers offer “extended” sealed compartments to accommodate a VT Pack isolating the 480 volts. The keyhole slot on the VT Pack makes mounting on any 1/4" mounting screw or shoulder rivet quick and easy. The VT Pack can also be mounted on a cross arm, pole or other suitable outdoor location when used with the optional Connector Cover.

Weight12 lbs.
Collar Diameter2.2"
Accuracy+/- 0.3% @ 12.5VA @ .1 PF lag
Connector9 pin, 600 volt, UL
EnclosureLight gray, UV resistant polycarbonate
Insulation level10 kV BIL
Transformer typeToroidal autotransformer
Thermal Rating150 VA @ 30° C
Size12 3/16" long by 4" wide by 3 1/16" deep, including 1" deep collar
Over voltage withstand960V for 1 minute